The 5G NR monitoring analyzer mainly deals with the complete test cases provided by the latest 5G NR communication system. It provides efficient test methods and means for spectrum analysis, interference investigation, base station test, road coverage and other test requirements. It is an essential tool for projects such as base station opening verification and network quality improvement projects.
"Multiple uses for one table"
———-Assist wireless engineers to better optimize wireless network
TDD interference troubleshooting tool - "Gating Technology"
Gating technology can separate the time domain and frequency domain. It is mainly used in the interference investigation of TDD-5G, TDD-LTE, DMR and other standards. Through the gating technology, the time unit can be freely set, such as: GPS delay, start Time slot, start symbol and other 4G and 5G time units, and the set time length can be quickly converted into frequency domain waveform through FFT Fourier, and the minimum 100MHz frequency domain waveform corresponding to any 5G symbol can be displayed, and then By locking the GP symbol (Note: GP is the guard interval, as the transition band from the downlink signal to the uplink signal, this time is a silent period, no data is sent) to filter out the downlink signal of the base station and the uplink signal of the user, and perform interference investigation.
TDD waveform under normal spectrum scan
After the gating technology is adopted, three kinds of signals under a TDD system will be stripped, namely: the downlink signal of the base station, the GP signal and the uplink signal of the UE.
Industry's first gating technology with "only 1" symbol level
The following figure uses the gating technology to synchronize the time domain waveform of the 5G signal in the mobile 2.6G band, and can display the 5G subframe ratio of 8:2, the period of 5ms, and the number of time slots S on the waveform. = period * 2u, so when the subcarrier interval is 30KHz, there are 10 time slots in total, and two periods are used cyclically.
It is backward compatible with TDD-LTE system interference check with a maximum bandwidth of 20MHz and other network interference check work using TDMA technology
It can also support the whole network 2-3-4-5G full-scale interference investigation, ensure the high cost performance of the user's instrument, and completely realize the "multi-purpose of one meter"
Signal coverage test
Key Specifications